How to Install an LED Bathroom Mirror in Australia

This guide explains how to mount and prepare an LED bathroom mirror for installation in an Australian home. Plug-in models may be connected to a suitable existing power outlet when the product instructions permit. Any hardwired connection, alteration to fixed wiring or other electrical work must be completed by a licensed electrician in accordance with applicable Australian requirements.

If you are still choosing a model, browse our LED bathroom mirrors before reviewing the installation requirements below.

Before You Install Your LED Mirror

Read the product manual and confirm the mirror's dimensions, weight, mounting points, cable position and power requirements before drilling. Check that the wall and fixings are suitable for the mirror's weight, and use an appropriate detector to avoid concealed pipes and electrical cables.

• Confirm the final position above the vanity or basin.
• Check that the mirror can be mounted level and that controls remain easy to reach.
• Use fixings suitable for the wall construction and the product's weight.
• Keep the mirror, cable and electrical connection within the locations permitted by the product instructions and applicable bathroom electrical requirements.
• Do not use damaged cables, plugs, mounting brackets or glass.

Option 1: Installing a Plug-In LED Mirror

This option applies only to a model supplied and intended for plug-in use. Use an existing suitable outlet and follow the product manual. Do not modify the plug or cable, and do not use an extension lead as a substitute for a properly located outlet.

Step 1: Position and Measure the Mirror

• Hold or mark the mirror's position and check its alignment with the vanity, basin and surrounding fittings.
• Confirm that the supplied cable reaches the suitable outlet without tension or contact with sharp edges.

Step 2: Install the Mounting Bracket

• Use the supplied template or bracket to mark the mounting points.
• Check for hidden services before drilling.
• Install appropriate wall plugs, anchors and the mounting bracket in accordance with the product instructions.

Step 3: Hang and Check the Mirror

• Use assistance when lifting a large or heavy mirror.
• Seat the mirror securely on the bracket and confirm that it is level and stable.
• Keep the cable correctly routed without pinching, stretching or modifying it.

Step 4: Connect and Test

• Connect the unmodified plug to the suitable existing outlet.
• Test the lighting, touch controls, demister and any model-specific features.
• Stop using the mirror and contact support or a licensed electrician if the unit, plug, cable or outlet becomes unusually hot, damaged or unreliable.

Option 2: Hardwired Installation

A hardwired installation provides a concealed connection, but it involves fixed electrical wiring. It must be completed by a licensed electrician. Do not cut the plug, strip conductors, alter the cable or connect the mirror to household wiring yourself.

Before the appointment, give the electrician the product manual, electrical specifications, mounting dimensions and intended mirror position. The electrician should determine the suitable connection method, isolation arrangement and bathroom location requirements for your property and jurisdiction.

Electrical and Bathroom Safety

Electrical safety is especially important in bathrooms. Do not assume conductor functions from wire colours, and do not energise a damaged or incomplete installation. If the existing outlet, switch, cable route or proposed location is unsuitable, ask a licensed electrician to assess the installation before the mirror is mounted or connected.

After installation, keep the product manual and any electrical compliance documentation supplied by the electrician. For general information about our range and services, visit LED Mirror World Australia, or contact our customer support team if you need the product specifications for your installer.

LED Mirror Installation FAQs